Products 

   References  

 Contact Us

 Job Photos

 Home Page

 

            Parking  Barrier  Gates        

 

 

DoorKing 1601 Barrier Gate       

 

 

 

The 1601 operator is designed for single lane (14 ft. max) vehicular traffic control in high traffic commercial and industrial applications.   The 1601 operator is designed so that it can be mounted on either the left or right hand side of the roadway.   The operator can be equipped with a DC convenience open package (optional) that will automatically raise the arm in the event of a power outage.

 

1601 Barrier Gate

15.25"W x 39.75"H x 14.75"D

1601
 

 

ADVANCED  FEATURES

 
 

 

  • Magnetic limit control.

  • Ports for plug-in loop detectors.

  • Automatic sequencing inputs for use with slide and swing gate operators.

  • Up input memory buffer.

  • Down memory option.

  • Multiple up commands.

  • Two convenience outlets.

  • 360° gear box rotation.

  • Gate tracker reporting output.

  • Programming switches.

  • Built-in power On/Off switch.

  • Left or right hand mount.

 

 

SPECIFICATIONS

 
 

  • 1/2 HP continuous-duty motor.

  • 115, 230*, 460* VAC.   (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)

  • 40:1 gear-box running in a continuous oil bath.

  • Arm rotates 90° in approximately 1.5 seconds.

  • Class II, III and IV applications.

  • Compliant with UL 325 and 991.   ETL Listed.   (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate operator.   Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)

  • Dimensions (operator only): 15.25"W x 39.75"H x 14.75"D.

 

OPTIONS  AVAILABLE  WITH  THIS  OPERATOR

 

 

DC powered convenience open.
14-foot round aluminum arm.
14-foot wood arm.
Wood arm folding bracket for low headroom.
12-foot plastic arm.
Plastic arm folding bracket for low headroom.
Foam padding for aluminum or wood arm.
Plug-in loop detectors.
Heater kit.
Fan kit.
Surge suppressors.

 

 

Model G-90 CD Series  Barrier Gate

 
 
G-90 CD Series Gate

 

   Features:
  • Rust-resistant aluminum enclosure
  • UL & CSA approved
  • Omega LCD Controller for total lane management
  • Configuration Module to define needs for lane layout

  Options Available:

  • Third built-in vehicle detector
  • Totalizing & differential counts
  • Automatic time zone controls
  • Hourly statistical reports
  • Directional logic
  • Broken gate arm alarm
  • Communications interface

The Model G-90 CD Series Barrier Gate is an improved/enhanced version of the popular LCD Series gate. It features microcomputer intelligence, multiple programming options, and on-board controls for complete lane management.

Configuration Module
The Model G-90 CD Gate can handle any type of lane configuration possible - including reversing lanes and lanes with three detector loops - with software options embedded into the unit's Configuration Module. The Configuration Module is an encapsulated pc board that utilizes surface mounted technology. This factory-program micro-controller (a 20-pin, 8-bit, fully static, EPROM/ROM-based micro-controller) plugs into the power board and defines the software options used in the gate.

Omega LCD Controller
The heart of the gate is the Omega LCD Controller. This fully integrated controller provides a systems approach for convenient, accurate, and cost-effective traffic lane management. The Omega LCD Controller allows you to design an on-board information center with counting functions packaged in one self-contained device. Counting functions (including totalizing counts, single and dual differential counts, hourly counts, and a host of statistical counts) are displayed on the controller's visual display and are accessed by the menu driven keypad.

Vehicle Detectors
Three built-in and automatically self-tuning vehicle detectors are available. These high-speed detectors provide a sensitive tailgate recognition system that is capable of recognizing two separate vehicles traveling over a detector loop simultaneously. Diagnostics and metering tools are also built into the controller.

Safer Operation
An advanced, maintenance-free safety and monitoring system is designed into every gate: the Sensitive Reversing Logic (SRL). This system instantly senses gate arm obstructions, broken gate arms, limit switch failures, and gate arm position - without the use of electromechanical systems.

 

 

 

Products           References           Contact Us          Job Photos